Dynomite Performance 6.1 HEMI cam and header packages with the Mopar Magician

Dynomite 6.1 HEMI Build Your Own Package

Build your package — choose options below

-

Build your 6.1 HEMI package with camshaft, supporting parts, headers and tuning. Optional $3,650 shop installation includes fluids and custom engine/transmission tuning; parts and PCM unlocking are additional.

Enter the exact model year of your vehicle.
Choose in-house tuning service or remote tuning services. 2015+ PCM Unlocking ONLY tab is listed here.
Select separately purchased engine/transmission tuning. In-house installation already includes both tuning services. PCM unlocking ONLY is a separate $250 choice listed above in the tuning method tab.
2011+ models only. Device and credits only; tuning and gateway bypass are not included. Select the credit package below. 2018+ requires a separate $90 bypass when RTD is chosen.
Required when an RTD is selected for a 2018+ vehicle.
Dual-fuel 93/E85 calibration is an additional $250 with an engine tune. Fuel pump and supporting hardware , remote tuning device are all additional charges.
Build for big power with a plug-and-play dual-pump drop-in returnless fuel system for 2006–2023 5.7 / 6.1 / 6.4 HEMI cars — $2,249.95. Pre-made plug-and-play wiring simplifies installation. A standalone PWM controller uses the supplied fuel-pressure and MAP sensors to control pump output, rather than relying on a boost switch to activate additional pumps. At idle and cruise, pumps operate at approximately 20–25% duty cycle, helping reduce fuel heating and unnecessary pump operation. The standard two-pump kit is rated by the supplier to support over 1,000 WHP on E90; actual capacity depends on the application and operating conditions. Upgradeable to a third pump if future power levels require more fuel volume. Fuel-system hardware is separate from tuning. Existing upgraded systems require verification; other applications require a separately quoted system. Optional third-pump upgrade adds $599.95, for a complete configured kit price of $2,849.90.
Optional sound request: pops, bangs or flames $100. Subject to exhaust setup and application review. A signed liability waiver may be required.
Ghost Cam tuning requests are subject to vehicle and exhaust setup review. Requests may be declined if catalytic converter heat is a concern. A signed liability waiver may be required.
2005–2023 in-house cam-package installation labor: $3,650. Includes fluids and custom engine/transmission tuning. No other parts are included. PCM unlocking is an optional additional $250 selection. Selected parts and applicable parts tax are additional. Fluids use the shop-supplies billing setup; installation labor is billed separately.
Choose one engine tuning price. Cammed and boosted uses the $950 added-boost price.
Device and credits only. Engine tuning, transmission tuning, PCM unlocking and the gateway bypass are separate charges.
Camshaft only: $579.95. Cam selection and fitment must match your engine and application.
Select the parts required for your build. VVT lockout applies only to VVT engines; car headers and intake must match your vehicle. Parts are additional to installation labor.
Choose the set matched to your engine: 5.7 $224.95, 6.1 $354.95, or 6.4 $254.95. Head sets include head bolts. Applicable parts tax is additional.
8HP70 converter: $1,495.95 + $550.00 core charge = $2,045.95 total. Each stall option includes the core charge. Applicable tax and shipping are additional. Choose the RPM stall for your 5.7 / 6.4 application.
Parts-only orders: $29.99 per quart. Fluids are included with the in-house installation labor package; do not add them again.
Choose this only if your PCM still needs unlocking. Unlocking is additional to the $3,650 installation labor and to RTD device pricing.
Choose the actual platform. Ram Classic / fourth-generation and 2019+ six-lug Rams use different header kits.
2009–2024 fourth-generation / Classic Ram application.
2019+ six-lug 5.7 Ram. Includes catted Y-pipe, O2 extensions, bolts and gaskets.
Car application only. Select the correct vehicle model before choosing headers. Price is headers with no installation or labor included.
Product total
Options total
Grand total
Categories: ,

Description

Build Your Own 6.1 HEMI Package

Choose your vehicle and model year, then choose the camshaft, supporting parts, headers, tuning and fuel-system options for your build. Parts are matched to the actual engine and vehicle configuration.

Parts and tuning in one package

Add lifters, valve springs, pushrods, an oil pump, intake, thermostat bypass plate, cam and crank bolts, and the appropriate head set. Head sets include head bolts. VVT lockout kits are for VVT engines only. Header kits vary by vehicle and Ram platform.

Choose custom engine/transmission tuning, PCM unlocking and optional fuel/sound upgrades. RTD options are available for 2011+ models and include the specified credits only: tuning, PCM unlocking and gateway bypass are separate. An RTD selected for 2018+ adds the $90 gateway bypass. E85 requires appropriate additional fuel-system hardware and tuning.

Add installation in the same listing

For 2005–2023 applications, shop installation adds $3,650 and includes labor, fluids, and custom engine and transmission tuning. No other parts are included. Selected parts and the $250 PCM unlock are additional. Installation is a separate non-taxable cart fee; applicable parts tax and shipping are additional. Fluids are handled through shop supplies. Do not purchase separate base engine/transmission tuning or extra fluids for an installed package.

Related products